isel CNC Multi-K with tool changer.
 

Machine Specifications
Travel - XYZ   205 x 320 x 150 mm,      Optional - Y travel 520mm 
Table size - 565 x 355mm,  Optional 565 x 765 
Slide specifications - Ball screws with linear ball bearings. 
Maximum travel speed - 26mm/sec  (1.560m/min) 
Drive motors - microstep 
Control software - Easymove and HPGL Windows versions. 

Spindle motor
Speed range - 300 to 24,000 RPM 
Poles - 2 
Nominal voltage - 3 x 210V 
Nominal output power - 0.5kW 
Constant power - 0.3kW 

Frequency converter
Nominal power -  1200 VA 
Nominal power of the motor - 0.37 to 0.55 kW 
Output voltage - 3 x 120 V 
Output frequency - 0 to 540 Hz 
Input voltage -  230 + 10% 
Mains frequency - 48 to 60 Hz 

Tool Changer (9 tool)
Specs - 9 tool change station with length measurement sensor. 
Shaft  - 1/4" or 1/8" 

CNC control computer computer
All in one CPU - 586 CPU (200 MHz), 32MB RAM, 2MB VGA card
Memory - Hardisk 2 GB, 1.44 Floppy,CD-ROM (32 x) 
Drive system -
* Miscrostep MPK3 
* Bipolar control of three stepper motors (30 V/2A) 
* Stepping resolution switchable by software, up to 128 steps/full step 
* Interpolation of 2 limit switches/axis 
* Motor output by 25 pole sub-D socket plug 
* PLM 2803 motor power supply 
* Off Emergency relay logic 
* Monitoring of work conditions 
* 230 VAC relay output 

Options
* Spray coolant mist unit
* 4th axis (Rotary)
* Floating engraving heads 
* Dispensing units